產品適用范圍
適用于生活小區、醫院、賓館、學校等的生活熱水系統。

Application range of product
The product is suitable for living hot water systems of living area, hospital, hotel and school.

產品特點
*換熱充分。汽—水換熱時能將凝結水的出水溫度降至約50℃，節能。水—水換熱時，在熱媒為低溫水(70~80℃)及額定產水量條件下，單級換熱可交換出所需溫度的熱水。
*在導流裝置的作用下，罐體底部冷水滯水區減少為“容積式水加熱器”的一半。
*罐體占地面積小，抽出管束所需空間小。
*保持了“容積式換熱器”被加熱水側水頭損失小(≤0.003MPa)的優點，有利于系統冷熱水壓力之平衡。

Product features
* Full heat exchange. When steam-water heat exchange, discharge temperature of condensation can be decreased to about 50℃, and saves energy. When water-water heat exchange, single level heat exchange can exchange out hot water with required temperature under the conditions that thermal medium is low temperature water (70-80℃) and output water quantity is rated.
* Stagnant area of cold water at the bottom of tank is decreased to half of  "volumetric water heater".
* Tank has small floor area, and space for drawing out pipes is small.
* Keeping advantage of small side water head loss at heating water of  "volumetric heat exchanger", and being favorable for making cold and hot water pressures of the system balanced.

主要技術參數
供應熱水：1T/H~60T/H             
一次熱源：蒸汽或高溫水            
承受壓力：0.1~2.5MPa(常用)            
設備容積：1.0~20m3

Main technical parameters
Hot water supply: 1T/H~60T/H                                   
Primary heat source: Steam of high temperature water
Bearing pressure: 0.1~2.5MPa(normal)                                      
Equipment volume: 1.0~20m3 

      山東宏達科技集團有限公司（濟南板式換熱器）是一家集新能源產品、核級壓力容器產品、石油石化產品、環保工程設計、制造及產業項目綜合性承包安裝為一體的集團化公司。